ARdiator Bracket

Any Technical Queries? This is the place to ask/give advice.
Post Reply
User avatar
r1076
Posts: 75
Joined: Sat Feb 20, 2010 7:58 pm

ARdiator Bracket

Post by r1076 » Mon Jun 17, 2013 12:50 pm

Hi Guys,

I need a template for the stepped Radiator Bracket, as my car doesn´t have its original anymore. Tried to make one, but without correct messurements, the fan hits the Radiator Cowling.


Thanks for Help!

wanted: Radio, front speaker, heater cover panel and radio panel


for sale: Castrol Sticker

User avatar
r1076
Posts: 75
Joined: Sat Feb 20, 2010 7:58 pm

Re: ARdiator Bracket

Post by r1076 » Mon Jun 24, 2013 9:31 am

No one?

wanted: Radio, front speaker, heater cover panel and radio panel


for sale: Castrol Sticker

arrian
Posts: 66
Joined: Thu May 22, 2008 7:11 am

Re: ARdiator Bracket

Post by arrian » Mon Jun 24, 2013 10:15 am

Unfortunately my car is about 200k's away and I don't think I'll be there for the next few weeks. I'll measure up mine when I'm next there if someone hasn't given some measurements sooner!

an old original
Posts: 110
Joined: Mon Sep 24, 2012 6:13 pm

Re: ARdiator Bracket

Post by an old original » Mon Jun 24, 2013 6:04 pm

I'll try and get under the bonnet in the next day or 2...

User avatar
r1076
Posts: 75
Joined: Sat Feb 20, 2010 7:58 pm

Re: ARdiator Bracket

Post by r1076 » Tue Jun 25, 2013 11:17 am

Thanks Guys!

wanted: Radio, front speaker, heater cover panel and radio panel


for sale: Castrol Sticker

kayball
Posts: 51
Joined: Sat Feb 03, 2007 7:11 pm

Re: Radiator Bracket

Post by kayball » Tue Jun 25, 2013 6:49 pm

Hi All.
Just found this very rough drawing of Radiator Top Bracket.
I have been intending to tart it up for years but never got around to it.
It was traced from original so if scaled on printer should be all ok to cut. bend positions are critical so note that first bend is 25mm from base of drawing and next bend, the other way is 20mm up from that to give a 20mm deep offset. If you can't read it or have any questions then please e-mail me direct.
Pete Kay (pkay@ntlworld.com)
Attachments
ERA Radiator top bracket.jpg
ERA Radiator top bracket.jpg (204.1 KiB) Viewed 18737 times

User avatar
r1076
Posts: 75
Joined: Sat Feb 20, 2010 7:58 pm

Re: ARdiator Bracket

Post by r1076 » Wed Jun 26, 2013 12:33 pm

Thank you very much.

wanted: Radio, front speaker, heater cover panel and radio panel


for sale: Castrol Sticker

User avatar
G96LUE
Posts: 466
Joined: Wed May 23, 2007 7:21 pm
Location: Walsall

Re: ARdiator Bracket

Post by G96LUE » Sat Jul 13, 2013 11:46 am

I made mine starting with a 1275GT top bracket and added the bends & extra holes. I'm sure that is what ERA would have done too :)

Post Reply