Timing Chain - simplex to duplex

Any Technical Queries? This is the place to ask/give advice.
Post Reply
an old original
Posts: 110
Joined: Mon Sep 24, 2012 6:13 pm

Timing Chain - simplex to duplex

Post by an old original » Mon Nov 24, 2014 5:02 pm

Hi all,

I've browsed thru' some posts on here and it seems quite possible but am still a little confuddled about what exactly is required to convert from the standard simplex to a duplex set-up..

help please

era1097
Posts: 61
Joined: Mon Jan 24, 2011 7:05 pm

Re: Timing Chain - simplex to duplex

Post by era1097 » Tue Nov 25, 2014 7:12 am

goodmorning,
To convert from simplex to duplex you have to modify the timing chain cover.
You have to take out the skirt on the inside of the cover.
And push out the dent.
i hope this will help.
Attachments
timing cover 1.jpg
timing cover 1.jpg (106.92 KiB) Viewed 26386 times
duplex.jpg
duplex.jpg (42.31 KiB) Viewed 26386 times
cover.jpg
cover.jpg (53 KiB) Viewed 26386 times

an old original
Posts: 110
Joined: Mon Sep 24, 2012 6:13 pm

Re: Timing Chain - simplex to duplex

Post by an old original » Tue Nov 25, 2014 4:00 pm

thanks for that- seems a relative simple conversion

paul
Posts: 276
Joined: Tue Jan 16, 2007 10:20 pm

Re: Timing Chain - simplex to duplex

Post by paul » Wed Nov 26, 2014 11:23 am

not really necessary, simplex chain has bad press as there are a lot of cheap kits about, a set of gears from a reputable source and an IWIS chain should give no issues and its a hell of a lot lighter.

Post Reply