Full Exhaust System

Any Technical Queries? This is the place to ask/give advice.
Post Reply
mgturbo#261
Posts: 7
Joined: Mon May 05, 2008 7:21 pm

Full Exhaust System

Post by mgturbo#261 » Wed May 07, 2008 2:34 pm

I need to replace the entire exhaust on 1038 when I get the engine back in it, can anyone recommend a full stainless system and downpipe to use. Ideally want the tailpipe to look as standard as possible.

I have always gone with Maniflow exhausts on my Metro Turbos, they offer a mini Turbo setup but I am unsure on the exit of the tailpipe etc.

Any advice would be useful

User avatar
G96LUE
Posts: 466
Joined: Wed May 23, 2007 7:21 pm
Location: Walsall

Re: Full Exhaust System

Post by G96LUE » Wed May 07, 2008 7:23 pm

Hi Again

i don't know to any stainless down pipes.
i used a mg metro turbo down pipe and cut it to length.
i then fitted a sainless RC40 exhast but had to have an adaptor made as the downpipe and the stainless pipe were the same diameter.

this might help

Regards

Darren

Post Reply